- Maker:-SUZUKI
- Model:-Swift
- Part Numbers:-43401-81P00
              
                  
SUZUKI SWIFT Wheel Hub bolt replacement-43401-81P00
          
Setup: Set camber to -1.75° for stability.
Hub Bolt Replacement: If hub bolts are hard to remove, use a 10mm wide tread spacer (M12 x P1.25, PCD 100, 4 holes, 54mm hub diameter).
Installation:
-
- Ensure hub diameter fits stock wheels.
- Adjust camber bolts to maximum negative camber.
- Check bolt protrusion and clearance; consider 8mm thickness if needed.
Pre and Post Checks:
-
- Note any scratches on the shock absorbers.
- Align tires and adjust suspension if necessary.
- Preparation for SUZUKI SWIFT Wheel Hub bolt replacement-43401-81P00 : Set the camber to 1.75 degrees. Use a 5mm spacer if needed.
- Tools: Use a long hub bolt from HKB Toei Industry. Employ a 6-ton press machine for installation.
- Procedure: Remove the caliper and hub assembly. Replace hub bolts with a press machine.
Assembly Replacement: Consider replacing the hub assembly after significant mileage. Use specified part numbers for hub assembly and nuts.
Final Steps: Install 5mm spacers and wheel nuts. Tighten hub nuts to 175 N•M. Measure alignment and adjust camber angle.
Conclusion
Completing the hub bolt replacement and camber adjustment not only enhances your vehicle’s stability and handling but also extends the lifespan of your wheels and suspension components. By following this guide, you ensure that your vehicle is better equipped to handle different driving conditions with improved safety and performance.
Remember, always double-check your work, especially the torque settings and alignment, to prevent any issues down the line. If you’re ever unsure about any step, consulting with a professional mechanic can provide additional peace of mind. With these adjustments, you’re ready to enjoy a smoother and more controlled driving experience.
Happy driving, and safe travels!
To view more repair guides, click this.