Similar Posts
- kuruma | autonews | Honda CR-V
Production starts with Honda’s new SUV “CR-V” with a powerful bonnet! The 6th generation is produced at 4 bases.
“Honda’s New SUV “”CR-V”” with a Powerful Bonnet Begins Production in Ka! Sixth-generation model to be produced at four locations
Prototype production will also be handled by the Canadian base
On September 22, 2022, Honda of America announced that production of the new CR-V has begun at its plant in Alliston, Ontario, Canada (HCM: Honda of Canada Mfg.).The presence of the large grille is also attractive! What does the new Honda CR-V look like? See in pictures.
The new CR-V will be produced at four plants in North America.
New “”CR-V”” to be produced at the plant
Commenting on the start of production of the new CR-V, HCM Senior Vice President Clement D’Souza said, “”Being the global lead plant for the new CR-V was a great challenge, but I am proud of the experienced team at HCM and the level of (development) teamwork that went into creating this great new model in North America. commented.
The new CR-V, the sixth generation model, made its world premiere in the U.S. on July 12, 2022, with body dimensions of 184.8 inches (4693 mm) long x 73.4 inches (1864 mm) wide x 66.2-66.6 inches (1681- 1691 mm) high.
The exterior features a low, horizontal beltline, LED-type headlights, a large front grille, and a bonnet with a strong presence.
The power units to be installed will be a 1.5-liter turbocharged inline 4-cylinder engine or a 2-liter inline 4-cylinder engine + 2-motor hybrid.
Incidentally, since development of the new CR-V began in the early stages of the new Corona disaster, HCM was also involved in the creation of the development prototype. The company has been collaborating digitally with the Japanese development team, which led to the start of production this time.
Since the hood is the largest of any U.S. Honda vehicle in its category, the production and development teams worked together to increase the rigidity of the hood by increasing the thickness of the steel plates. As a result, a bold and sophisticated design was successfully mass-produced.
In addition, the use of high-performance structural adhesives was increased to enhance body rigidity. New equipment and additional training for employees were also introduced for production.
The Canadian plant is scheduled to begin production of a hybrid version of the new CR-V in October, and as a result, the production of the new CR-V in Canada is expected to account for about half of its sales.”
The Toyota Hiace, a commercial vehicle with a consistent monthly sales volume of 6,000 units
The Toyota Hiace, a commercial vehicle with a consistent monthly sales volume of 6,000 units, has stopped taking orders. There are rumors that the next generation Hiace will undergo a full model change in 2024, which may involve a price change. The current Hiace, known as the 7th generation, debuted in 2004 and is approaching its 20th anniversary. As regulations on safety, emissions, and noise become increasingly stringent, it remains to be seen how the Hiace will adapt.
Toyota’s “Hiace” may be stopping orders, but what will happen to the next generation Hiace? There is speculation of a full model change, but there are concerns about the lack of benefits. The Hiace is widely used in Africa and South America as a reliable mode of transportation, and the availability of cheap replacement parts for the current model is a major factor. Additionally, with the need for an electric version by 2030 and the eventual ban on engine cars by 2035, a full model change in 2024 would only be viable for about 10 years. Therefore, it is likely that Toyota will make improvements to the current 200 series model in 2024.Toyota luxury SUV new “Harrier” debuts! Exceeding 8 million yen, a vivid red grade exclusive color also announced in Malaysia .
“New Toyota Harrier luxury SUV is here! Over 8 million yen, exclusive color for the grade of intense red, also unveiled in Malaysia
Toyota Safety Sense also evolves
Toyota’s Malaysian subsidiary has announced that it has upgraded the Harrier, which will go on sale there on October 11, 2022.What is the new, improved Harrier model? View in Pictures .
Toyota “”Harrier”” to be sold in Malaysia
The current Harrier will be launched in the Malaysian market in February 2021.
The new version includes advanced preventive safety features and Toyota Safety Sense, which includes advanced features such as panoramic view monitor, lane departure alert, and dynamic radar cruise control, which is said to enable safer driving.
Also, a new grade, the Luxury SE, has been introduced. An exclusive red metallic body color is available.
The Harrier, which will be produced at the Takaoka Plant in Aichi Prefecture and exported to Malaysia, will be priced between 274,000 ringgit and 277,000 ringgit (approximately 8.67 million yen to 8.76 million yen).
Translated with www.DeepL.com/Translator (free version)”
The new Suzuki Jimny 5-door will be launched in India
The new Suzuki Jimny 5-door will be launched in India. It will also be launched in Australia by the end of the year as the “Extra Large Jimny” and is said to be followed by Europe. There is a back order of 80,000 units in Japan, and parallel imports are attracting attention. In the past, a mid-long model of the old Jimny and a current 3-door van have been parallel-imported.
Suzuki will release the new “Jimny 5-door” on June 7th, and the manual transmission version is expected to be popular with a waiting period of over six months. There is discussion about whether it is possible to import the car from India. However, when importing parallel-imported cars into Japan, a vehicle manufacturing certificate is required, which is often not included when importing from Asia, including India. Therefore, it may take a considerable amount of time to register the vehicle in Japan. Additionally, if the Jimny 5-door is imported into Japan, the price will be significantly higher than the 3-door version due to shipping costs, registration fees, and exchange rates. Despite this, some users are willing to pay the higher price to own the car as soon as possible.New Toyota Prius no longer has a rear-seat doorknob
Toyota, a pioneer in the hybrid car market, has unveiled the latest iteration of its iconic Prius model on January 10, 2023. With a bold blend of captivating design and enhanced driving dynamics, the fifth-generation Prius aims to redefine the hybrid driving experience. Notably, a unique feature that has caught the attention of enthusiasts is the unconventional transformation of the rear-seat door knob into a discreet switch. While this innovation accentuates the car’s sleek coupe-like appearance, questions arise about its functionality and potential drawbacks, sparking discussions across social networking platforms.
The Evolution of the Prius Design:
The Prius, introduced in 1997 as the world’s first mass-produced hybrid vehicle, has established itself as a flagship model for Toyota. The latest rendition, conceived under the concept of “Hybrid Reborn,” seamlessly marries aesthetic appeal with dynamic performance. This generation introduces a sportier interior and exterior, characterized by an emotionally resonant body shape and timeless elegance. The coupé-like silhouette, complemented by 19-inch wheels and pronounced A-pillars, exudes a sense of universal beauty that is expected to stand the test of time.
Innovative “Hidden Door Knob” Concept:
Directing attention to the rear doors, a notable departure from convention is observed – the integration of door handles into the C-pillar. This discreet “hidden door knob” design, reminiscent of the approach used in the crossover SUV C-HR, aligns with the overarching design goal of achieving a two-door aesthetic. By integrating the handles into the C-pillar, the Prius presents a cleaner and more streamlined profile.
Transition from Mechanical to Electrical Access:
Perhaps the most intriguing transformation lies in the door-opening mechanism itself. Instead of a traditional mechanical door knob, Toyota has implemented a state-of-the-art “door open switch.” This switch, powered by an electric motor, enables the unlocking and opening of the doors. The shift from a visible knob to an inconspicuous switch aligns with the model’s pursuit of refined aesthetics.
Advantages and Considerations:
While the switch-based door opening aligns seamlessly with the car’s design ethos, it does come with its set of pros and cons. The advantages include enhanced styling due to reduced visibility of the door handle, contributing to the car’s sleek appearance. However, potential disadvantages include operational limitations. The instruction manual stipulates that the switch may temporarily cease functioning in scenarios such as high battery usage or repeated activations in quick succession, which could trigger overheating. Additionally, the switch’s operability might be compromised for a brief period following a strong impact from any direction during an accident.
Addressing Concerns and Ensuring Functionality:
To mitigate potential malfunctions, Toyota has provided a manual operation button located beneath the door open switch. This manual override allows users to open the door manually in situations where the switch might not operate optimally, such as when the battery is running low.
Social Media Feedback:
The introduction of the C-pillar embedded door handles has ignited discussions on various social networking sites. Enthusiasts have praised the sleek and sophisticated appearance achieved through the absence of visible door knobs, likening the design to that of a coupe. However, concerns have also been voiced, particularly regarding rearward visibility and the practicality of the switch-based system. Some users have suggested that a conventional knob might offer a more intuitive and reliable solution.
Future Prospects:
The new Prius model is set to roll out first as a hybrid model, with the Plug-in Hybrid Electric Vehicle (PHEV) variant expected to hit the market in March 2023. As automotive enthusiasts and potential buyers continue to engage in conversations about the innovative rear-seat door switch, Toyota’s innovative approach could shape future design trends and considerations across the automotive industry.
Nissan revives the Sunny or the first time in almost 40 years
Nissan revives the “Sunny” for the first time in almost 40 years! What are the features of the “”near-future LEAF”” with sports specs & presence with Silvia engine?
What is the Sunny with presence LEAF and Sylvia engine?
Nissan operates five automotive vocational schools across Japan.
Among them, Nissan Kyoto Automobile College (Kyoto School) has unveiled in the past the “”LEAF”” with a futuristic design and the “”SUNNY”” with a retro design.This is amazing! The birth of the Silvia-powered “”Sunny””! See the real car at an impressive level!
This is amazing! Nissan Kyoto School’s “”Sunny”” with Silvia engine unveiled at Osaka Auto Messe 2018
Nissan Automotive University Schools are located in Tochigi, Yokohama, Aichi, Kyoto, and Ehime.
The Nissan Automotive College’s educational policy is to “”develop human resources who can contribute to society based on education that enhances communication skills.
The school has sent many graduates to Nissan, Nissan sales companies nationwide, and other automobile-related companies.
Among them, Kyoto School is a school where those who aim to become highly-skilled automotive engineers can enjoy learning the latest and most practical technology and knowledge.
In April 2017, the Kyoto School also opened the Customization Department, where students are encouraged to create their own vehicles by realizing body designs based on their own free ideas.
In addition to students’ imagination, they create custom cars by making full use of “”maintenance knowledge and skills”” and “”sheet metal painting techniques”” they have learned up to now, as well as “”wrapping techniques”” and “”FRP processing techniques”” they learned in the new course.
In this context, LEAF and SUNNY customized cars were unveiled at Osaka Auto Messe 2018.
The LEAF, named “”RL-R,”” is a futuristic sports car based on an environmentally friendly electric vehicle with the concept of “”an overwhelming sense of presence that sets it apart from others.
The new model has a sleeker shape than the previous LEAF, and the rear fenders have an original pavilion design.
In addition, Nancan “”NS-II (285/30R18)”” tires and Work Emotion “”T7R (18-inch)”” wheels were installed on the feet.
The other Sunny was based on a 1970s KB10 model with the concept of “”making an old car new,”” and was equipped with the power unit and powertrain of the “”Silvia (S15). The “”Silvia (S14)”” suspension was more transplanted to this model, making it a compact car with high power output.
In appearance, it has a blue body color with a front bumper and over fenders that have a strong presence.
For the suspension, Yokohama “”Advan Neova AD08 (215/45R16)”” tires and Work “”Meister (16-inch)”” wheels were used, and the vehicle was lowered by installing a coilover suspension.
The person in charge at the time had the following to say about these two vehicles.
The seven students in the first year of the customization course started building the Leaf and Sunny with the goal of exhibiting at the Osaka Auto Messe, armed with the maintenance skills they acquired in their first and second years, and the sheet metal painting skills they acquired in their third year.
Despite the time passing by, the students never gave up and gave up their Saturdays and Sundays to work on the two vehicles, completing them and making them look stunning.
The Sunny won 10th place in the dress-up and tuning car contest held at the Osaka Auto Messe 2018, and was also introduced in an American magazine.
The Kyoto School also made a big splash at the Tokyo Auto Salon 2023 with the unveiling of the “”FAIRLADY X,”” a crossover model with a “”FAIRLADY Z”” face.